'ODROID'

Some stuff about GNU/Linux on ODROID-C2. The purpose is to adapt the Epeios software components to an ARM 64 bits architecture, the 32 bits one is already supported thanks to my Nokia N900.

I choose odrobian : http://oph.mdrjr.net/odrobian/doc/getting-started.html. The following procedure is for Windows.

• Download an image : http://oph.mdrjr.net/odrobian/images/s905/ (the not hybrid one ; don't really know what the difference is between hybrid/non-hybrid without/with ),
• extract (7-Zip can be used for this),
• write above resulting image to SD card using Disk Imager (retreived from http://odroid.com/dokuwiki/doku.php?id=en:odroid_flashing_tools),
• apt-get update,
• apt-get install aptitude (after this, you can use aptitude to as package manager),
• dpkg-reconfigure tzdata.

• git clone https://github.com/hardkernel/wiringPi
• cd wiringPi
• sudo ./build

https://wiki.odroid.com/odroid-c2/application_note/gpio/wiringpi

Package name for the python package manager (pip): python-pip.

• sudo apt install python-dev python-setuptools python3-dev python3-setuptools swig
• git clone --recursive https://github.com/hardkernel/WiringPi2-Python
• cd WiringPi2-Python
• sudo python3 setup.py install

https://forum.odroid.com/viewtopic.php?t=31945

Add following to /etc/modprobe.d/blacklist.conf:

# Prevents the GPIO 7 to switching automatically back to IN mode.
blacklist w1_gpio
blacklist wire

https://forum.odroid.com/viewtopic.php?t=23503