'ODROID-SHOW2' device

All other parameters are OFF.

Under Windows, to configure the serial port correctly, launch mode com<n> 500000,n,8,1, where <n> is the serial port number (launching mode displays the available ports).

It seems that above command sets some parameters to ON, but it seems not to matter…

Under GNU/Linux, to set the parameters for this device, launch stty -F /dev/ttyUSB<n> 500000.

Following instructions concern the Arduino IDE.

• First, launch git clone https://github.com/hardkernel/ODROID-SHOW in a console,
• Click on ODROID-SHOW/show_main/show_main.ino (should have be created by above command) ; this should launch the Arduino IDE,
• File/Preferences/Settings/Sketchbook location: : set it to the above ODROID-SHOW directory,
• Sketch/Import Library/Add Library…/: point to above ODROID-SHOW directory.